zhongziso
搜索
zhongziso
首页
首页
功能
磁力转BT
BT转磁力
关于
使用教程
免责声明
磁力助手
[FreeTutorials.Us] Udemy - Engineering Simulations - Complete ANSYS 15.0 Course
magnet:?xt=urn:btih:93db3946e7258b968678525c9c9629a720bf7275&dn=[FreeTutorials.Us] Udemy - Engineering Simulations - Complete ANSYS 15.0 Course
磁力链接详情
文件列表详情
93db3946e7258b968678525c9c9629a720bf7275
infohash:
359
文件数量
18.69 GB
文件大小
2019-9-15 11:58
创建日期
2024-11-10 20:47
最后访问
相关分词
FreeTutorials
Us
Udemy
-
Engineering
Simulations
-
Complete
ANSYS
15
0
Course
452736 - 001 - Introduction.mp4 38.55 MB
452736 - 002 - Workflows.mp4 27.98 MB
452736 - 003 - Cell States.mp4 31.93 MB
452736 - 004 - Sharing Data.mp4 20.46 MB
452736 - 005 - Files.mp4 30.14 MB
452736 - 006 - Parameters and Summary.mp4 33.11 MB
452736 - 007 - DM.mp4 64.74 MB
452736 - 008 - Launching DM.mp4 44.5 MB
452736 - 009 - User Interface.mp4 137.81 MB
452736 - 010 - Selection Tools.mp4 41.86 MB
452736 - 011 - View Controls.mp4 47.48 MB
452736 - 012 - Edge Display Options.mp4 39.88 MB
452736 - 013 - Mouse and Hotkeys.mp4 37.68 MB
452736 - 014 - Workshop 1 Basics (T-Piece).mp4 61.93 MB
452736 - 015 - Planes and Sketches.mp4 24.96 MB
452736 - 016 - Working with Planes.mp4 38.28 MB
452736 - 017 - Creating Sketches.mp4 44.45 MB
452736 - 018 - Modifying Sketches.mp4 51.94 MB
452736 - 019 - Dimensioning Sketches.mp4 34.1 MB
452736 - 020 - Constraints and Settings.mp4 61.31 MB
452736 - 021 - Tips, Copying and Projecting.mp4 44.11 MB
452736 - 022 - Workshop 2 Sketching (Castor Wheel).mp4 55.83 MB
452736 - 023 - Modeling.mp4 24.24 MB
452736 - 024 - Body States, Active and Frozen.mp4 35.34 MB
452736 - 025 - 3D Features Extrude.mp4 133.58 MB
452736 - 026 - 3D Features Revolve and Sweep.mp4 28.96 MB
452736 - 027 - Skins, Thin Surfaces and Blending.mp4 33.81 MB
452736 - 028 - Using Patterns to Create Multiple Copies.mp4 15.7 MB
452736 - 029 - Body and Boolean Operations.mp4 89.96 MB
452736 - 030 - Slicing.mp4 34.03 MB
452736 - 031 - Primitives.mp4 10.34 MB
452736 - 032 - Creating 2D objects.mp4 25.92 MB
452736 - 033 - Suppressing and Hiding Objects.mp4 31.15 MB
452736 - 034 - Named Selections.mp4 49.44 MB
452736 - 035 - Single and Multi-Body Parts.mp4 79.72 MB
452736 - 036 - Workshop 3 Modeling (Exhaust).mp4 163.41 MB
452736 - 037 - Geometry Simplification and Repair.mp4 85.51 MB
452736 - 038 - Analysis and Repair Tools.mp4 172.42 MB
452736 - 039 - Defeaturing with Face and Edge Delete.mp4 50.16 MB
452736 - 040 - Face Split.mp4 20.77 MB
452736 - 041 - Patching a surface.mp4 26.61 MB
452736 - 042 - Projection and Sew.mp4 58.39 MB
452736 - 043 - Fill, Enclosure and Symmetry.mp4 106.91 MB
452736 - 044 - Connect, and Surface Extension.mp4 70.35 MB
452736 - 045 - Geometry Types and Conversion.mp4 61.66 MB
452736 - 046 - Workshop 4 Cleanup (Turbocharger).mp4 182.84 MB
452736 - 047 - Geometry Properties.mp4 48.23 MB
452736 - 048 - CAD Connections.mp4 150.03 MB
452736 - 049 - GAMBIT Reader.mp4 14.09 MB
452736 - 050 - Introduction and Types.mp4 52.22 MB
452736 - 051 - Parameters from CAD.mp4 23.64 MB
452736 - 052 - Creating Parameters in DM.mp4 26.38 MB
452736 - 053 - Parameter Manager.mp4 39.14 MB
452736 - 054 - Driven Parameters (writing functions).mp4 52.14 MB
452736 - 055 - Auxiliary Variables and Functions.mp4 21.53 MB
452736 - 056 - Workshop 5a Mixing Tank.mp4 152.95 MB
452736 - 057 - Workshop 5b Automotive Aero.mp4 278.01 MB
452736 - 058 - Workshop 5c Conical Combustion Chamber.mp4 106.82 MB
452736 - 059 - Workshop 5d Bracket.mp4 199.5 MB
452736 - 060 - Workshop 5e Pulley.mp4 106.6 MB
452736 - 061 - Beams and Shells.mp4 26.3 MB
452736 - 062 - Line Bodies.mp4 48.23 MB
452736 - 063 - Cross Sections.mp4 45.62 MB
452736 - 064 - Cross Section Alignment and Offset.mp4 122.42 MB
452736 - 065 - Surfaces from Edges and Sketches.mp4 50.24 MB
452736 - 066 - Creating Mid Surfaces.mp4 67.66 MB
452736 - 067 - Modifying Mid Surfaces.mp4 43.05 MB
452736 - 068 - Joints.mp4 35.7 MB
452736 - 069 - Workshop 6 Beam and Shell Modeling.mp4 161.83 MB
452736 - 070 - Lines and Bodies.mp4 22.63 MB
452736 - 071 - Line Bodies.mp4 32.1 MB
452736 - 072 - Cross Sections.mp4 16.79 MB
452736 - 073 - Surfaces from Edges and Sketches.mp4 32.92 MB
452736 - 074 - Mid-Surfaces.mp4 45.81 MB
452736 - 075 - Joints.mp4 22.05 MB
452736 - 076 - Introduction.mp4 103 MB
452736 - 077 - Launching Meshing and GUI Basics.mp4 85.84 MB
452736 - 078 - Graphics Controls.mp4 49.41 MB
452736 - 079 - Multiple Parts and Bodies.mp4 42.44 MB
452736 - 080 - Overview of Meshing Methods.mp4 80.21 MB
452736 - 081 - Overview of Global Controls.mp4 21.65 MB
452736 - 082 - Overview of Local Controls.mp4 22.05 MB
452736 - 083 - Named Selections.mp4 55.85 MB
452736 - 084 - Overview of Mesh Creation.mp4 20.33 MB
452736 - 085 - Checking Mesh Quality.mp4 34.81 MB
452736 - 086 - Parameterization of Meshing.mp4 14.28 MB
452736 - 087 - Workshop 1 Meshing Basics (T-Piece).mp4 101.29 MB
452736 - 088 - Meshing Methods.mp4 58.15 MB
452736 - 089 - Tetrahedrons Methods.mp4 65.49 MB
452736 - 090 - Settings to Control the Mesh.mp4 36.05 MB
452736 - 091 - Hexahedral (Hex) Meshing Introduction.mp4 16.95 MB
452736 - 092 - Sweep Tool for Hex Prism Meshing.mp4 82.55 MB
452736 - 093 - Multizone Tool for Hex Prism Meshing.mp4 47.08 MB
452736 - 094 - Automatic Method.mp4 10.13 MB
452736 - 095 - 2D Meshing.mp4 38.37 MB
452736 - 096 - Meshing Multiple Bodies.mp4 79.75 MB
452736 - 097 - Workshop 2 Mesh Methods (Block and Pipe).mp4 178.87 MB
452736 - 098 - Overview of Global Controls.mp4 25.38 MB
452736 - 099 - Defaults and Relevance Setting.mp4 14.08 MB
452736 - 100 - Sizing Settings.mp4 64.9 MB
452736 - 101 - Inflation (Boundary Layer) Meshes.mp4 57.22 MB
452736 - 102 - Advanced Inflation Options.mp4 34.06 MB
452736 - 103 - Defeaturing.mp4 5.57 MB
452736 - 104 - Mesh Quality and Statistics.mp4 10.33 MB
452736 - 105 - Workshop 3 Global Controls (Landing Gear).mp4 120.78 MB
452736 - 106 - Overview of Local Controls.mp4 29.46 MB
452736 - 107 - Local Sizing Controls.mp4 23.86 MB
452736 - 108 - Sphere and Body of Influence.mp4 28.65 MB
452736 - 109 - Mapped Face Meshing.mp4 27.34 MB
452736 - 110 - Matched Meshing (for Periodic Boundaries).mp4 25.13 MB
452736 - 111 - Pinch Control.mp4 4.14 MB
452736 - 112 - Inflation as a Local Control.mp4 15.3 MB
452736 - 113 - Workshop 4 Local Controls (Valve body).mp4 122.2 MB
452736 - 114 - Overview of Assembly Meshing.mp4 30.04 MB
452736 - 115 - CutCell Assembly Meshing.mp4 18.63 MB
452736 - 116 - Tetrahedral Assembly Meshing.mp4 9.92 MB
452736 - 117 - Controls for Assembly Meshing.mp4 56.5 MB
452736 - 118 - Virtual Bodies.mp4 24.47 MB
452736 - 119 - Defining Fluid (Wetted) Surfaces.mp4 7.25 MB
452736 - 120 - Sharp Angles and Leakage Paths.mp4 11.21 MB
452736 - 121 - Overview of Mesh Quality.mp4 16.76 MB
452736 - 122 - The Importance of Mesh Quality.mp4 78.04 MB
452736 - 123 - Hex vs Tet meshing.mp4 18.04 MB
452736 - 124 - Mesh Metrics Skewness and Orthogonal Quality.mp4 74.27 MB
452736 - 125 - Mesh Metrics Aspect Ratio and Smoothness.mp4 23.75 MB
452736 - 126 - Mesh Metric Graph.mp4 28.03 MB
452736 - 127 - Section Planes.mp4 29.59 MB
452736 - 128 - CFX Mesh Quality Check.mp4 7.68 MB
452736 - 129 - Fluent Mesh Quality Check.mp4 14.06 MB
452736 - 130 - Improving Quality Virtual Topology.mp4 107.4 MB
452736 - 131 - Improving Quality Pinch Tool.mp4 39.17 MB
452736 - 132 - Workshop 5a Applications Mixing Tank.mp4 133.12 MB
452736 - 133 - Workshop 5b Applications Auto Aero.mp4 200.28 MB
452736 - 134 - Workshop 5c Applications Chamber.mp4 105.86 MB
452736 - 135 - Workshop 5d Applications Assembly Meshing.mp4 104.97 MB
452736 - 136 - Basic Analysis Procedure.mp4 31.48 MB
452736 - 137 - The Mechanical Interface.mp4 33.26 MB
452736 - 138 - Menus.mp4 28.33 MB
452736 - 139 - Toolbars.mp4 109.23 MB
452736 - 140 - Graphics Control and Selection.mp4 47.29 MB
452736 - 141 - Outline Tree and Details.mp4 61.48 MB
452736 - 142 - Tagging and Tree Filtering.mp4 62.66 MB
452736 - 143 - Graphics Window.mp4 29.87 MB
452736 - 144 - The Mechanical Application Wizard.mp4 37.26 MB
452736 - 145 - Scoping Loads and Supports.mp4 88.75 MB
452736 - 146 - The Engineering Data application.mp4 185.34 MB
452736 - 147 - Assigning Material Properties.mp4 20.9 MB
452736 - 148 - Workshop 2-1 Basics.mp4 75.29 MB
452736 - 149 - Geometry.mp4 67.89 MB
452736 - 150 - Contact.mp4 39.32 MB
452736 - 151 - Workshop 3-1 2D Gear and Rack Analysis.mp4 58.58 MB
452736 - 152 - Coordinate Systems.mp4 36.27 MB
452736 - 153 - Named Selections.mp4 92.84 MB
452736 - 154 - Workshop 3-2 Named Selections.mp4 79.02 MB
452736 - 155 - Object Generator.mp4 84.74 MB
452736 - 156 - Selection Information.mp4 14.47 MB
452736 - 157 - Workshop 3-3 Object Generator.mp4 83.7 MB
452736 - 158 - Global Meshing Controls.mp4 76.48 MB
452736 - 159 - Local Meshing Controls.mp4 158.09 MB
452736 - 160 - Meshing Troubleshooting.mp4 23.71 MB
452736 - 161 - Virtual Topology.mp4 88.38 MB
452736 - 162 - Workshop 4-1 Mesh Control.mp4 135.76 MB
452736 - 163 - Submodeling.mp4 66.83 MB
452736 - 164 - Basics of Linear Static Analysis.mp4 12.67 MB
452736 - 165 - Geometry.mp4 25.31 MB
452736 - 166 - Material Properties.mp4 10.31 MB
452736 - 167 - Contact.mp4 20.99 MB
452736 - 168 - Analysis Settings.mp4 48.6 MB
452736 - 169 - Loads.mp4 201.45 MB
452736 - 170 - Supports.mp4 83.66 MB
452736 - 171 - Nodal Loads and Supports.mp4 60.83 MB
452736 - 172 - Load and Support Display.mp4 12.12 MB
452736 - 173 - Solving Models.mp4 17.47 MB
452736 - 174 - Workshop 5-1 Pump Assembly With Contact.mp4 94.99 MB
452736 - 175 - Results and Postprocessing.mp4 125.33 MB
452736 - 176 - Workshop 5-2 Using Beam Connections.mp4 70.64 MB
452736 - 177 - Contact.mp4 118.89 MB
452736 - 178 - Contact Controls.mp4 107.73 MB
452736 - 179 - Contact Results.mp4 18.23 MB
452736 - 180 - Spot Welds.mp4 11.55 MB
452736 - 181 - Mesh Connections.mp4 34.99 MB
452736 - 182 - Connections Worksheet.mp4 34.84 MB
452736 - 183 - Workshop 6-1 Contact Offset Control.mp4 50.39 MB
452736 - 184 - Joint Definitions.mp4 39.94 MB
452736 - 185 - Joint Configuration.mp4 47.16 MB
452736 - 186 - Joint Stops and Locks.mp4 7.35 MB
452736 - 187 - Springs and Beams.mp4 31.99 MB
452736 - 188 - Workshop 6-2 Using Joints.mp4 63.69 MB
452736 - 189 - Definitions.mp4 23.05 MB
452736 - 190 - Remote Points.mp4 37.67 MB
452736 - 191 - Behavior Control.mp4 33 MB
452736 - 192 - Pinball Control.mp4 34.46 MB
452736 - 193 - Remote Point Sharing.mp4 36.87 MB
452736 - 194 - Display Options.mp4 56.1 MB
452736 - 195 - Workshop 7-1 Remote Boundary Conditions.mp4 45.62 MB
452736 - 196 - Constraint Equations.mp4 40.63 MB
452736 - 197 - CE Example.mp4 58.05 MB
452736 - 198 - Workshop 7-2 Constraint Equations.mp4 42.17 MB
452736 - 199 - Multistep Analysis.mp4 13.31 MB
452736 - 200 - Multistep Setup.mp4 10.15 MB
452736 - 201 - Multistep Controls.mp4 27.95 MB
452736 - 202 - Multistep Loads.mp4 33.21 MB
452736 - 203 - Multistep Postprocessing.mp4 25.27 MB
452736 - 204 - Solution Combinations.mp4 76.15 MB
452736 - 205 - Workshop 8-1 Multistep Analysis.mp4 69.37 MB
452736 - 206 - Basics of Free Vibration.mp4 22.55 MB
452736 - 207 - Geometry.mp4 19.47 MB
452736 - 208 - Contact.mp4 22.25 MB
452736 - 209 - Solution Setup.mp4 32.63 MB
452736 - 210 - Modal Results.mp4 17 MB
452736 - 211 - Vibration With Prestress.mp4 46.05 MB
452736 - 212 - Workshop 9-1 Free Vibration - Machine Frame.mp4 76.44 MB
452736 - 213 - Basics of Steady State Heat Transfer.mp4 16.41 MB
452736 - 214 - Geometry.mp4 10 MB
452736 - 215 - Material Properties.mp4 3.88 MB
452736 - 216 - Thermal Contact.mp4 63.38 MB
452736 - 217 - Thermal Boundary Conditions.mp4 124.8 MB
452736 - 218 - Solution Options.mp4 19.8 MB
452736 - 219 - Results and Postprocessing.mp4 27.97 MB
452736 - 220 - Workshop 10-1 Pump Housing.mp4 64.8 MB
452736 - 221 - Viewing Results.mp4 33.27 MB
452736 - 222 - Legend Controls.mp4 48.97 MB
452736 - 223 - Contour Controls.mp4 63.04 MB
452736 - 224 - Postprocessing Utilities.mp4 149.6 MB
452736 - 225 - Scoping Results.mp4 65.53 MB
452736 - 226 - Linearized Stress.mp4 8.56 MB
452736 - 227 - Exporting Results.mp4 23.02 MB
452736 - 228 - Coordinate Systems.mp4 14.44 MB
452736 - 229 - Error Estimation.mp4 47.29 MB
452736 - 230 - Convergence.mp4 86.6 MB
452736 - 231 - Stress Singularities.mp4 27.59 MB
452736 - 232 - Convergence and Scoping.mp4 23.11 MB
452736 - 233 - Workshop 11-1 Results Processing.mp4 88.09 MB
452736 - 234 - CAD Import.mp4 118.83 MB
452736 - 235 - Defining Parameters in Workbench.mp4 31.69 MB
452736 - 236 - Using the Parameter Workspace.mp4 140.92 MB
452736 - 237 - Updating CAD Parameters.mp4 35.51 MB
452736 - 238 - Workshop 12-1 Parameter Management.mp4 52.9 MB
452736 - 239 - Introduction and what is CFD.mp4 27.6 MB
452736 - 240 - Step-by-step through CFD workflow.mp4 111.68 MB
452736 - 241 - Launching CFX.mp4 9.19 MB
452736 - 242 - CFX-Pre.mp4 61.54 MB
452736 - 243 - CFX Solver Manager.mp4 25.34 MB
452736 - 244 - CFD-Post.mp4 25.58 MB
452736 - 245 - File Types Used.mp4 42.65 MB
452736 - 246 - Workshop 1 Mixing Tee.mp4 157.58 MB
452736 - 247 - Domain Basics.mp4 20.71 MB
452736 - 248 - Domains Reference Pressure.mp4 17.68 MB
452736 - 249 - Domains Setting Buoyancy.mp4 45.17 MB
452736 - 250 - Domain Types (Moving Solid).mp4 26.82 MB
452736 - 251 - Porous Domain Models.mp4 31.12 MB
452736 - 252 - Materials and Multicomponent Flows.mp4 24.06 MB
452736 - 253 - Boundary Conditions.mp4 34.71 MB
452736 - 254 - Specifying a Well posed BC.mp4 66.26 MB
452736 - 255 - Source Terms.mp4 38.02 MB
452736 - 256 - Workshop 2 Mixing Tee with Particles.mp4 111.95 MB
452736 - 257 - Workshop 3 Mixing Tube.mp4 284.02 MB
452736 - 258 - Introduction and Launching.mp4 23.06 MB
452736 - 259 - 3D Standalone Viewer.mp4 17.15 MB
452736 - 260 - General Workflow.mp4 24.32 MB
452736 - 261 - Variables, Tables and Charts.mp4 36.93 MB
452736 - 262 - Reports and Case Comparison.mp4 23.69 MB
452736 - 263 - Workshop 4 Postprocessing.mp4 302.22 MB
452736 - 264 - Introduction and Initialization.mp4 27.61 MB
452736 - 265 - Solver Control and Numerics.mp4 43.63 MB
452736 - 266 - Timescale Control.mp4 26.56 MB
452736 - 267 - Convergence.mp4 20.79 MB
452736 - 268 - Other Solver Controls.mp4 13.37 MB
452736 - 269 - Output Control.mp4 14.11 MB
452736 - 270 - Solver Manager Serial and Parallel.mp4 28.56 MB
452736 - 271 - Solver Manager Interactive Control.mp4 18.3 MB
452736 - 272 - Output File from the Solver.mp4 57.37 MB
452736 - 273 - Workshop 5 Airfoil.mp4 125.18 MB
452736 - 274 - Introduction.mp4 31.85 MB
452736 - 275 - Domain Interfaces.mp4 103.46 MB
452736 - 276 - Mesh Connection Method.mp4 55.99 MB
452736 - 277 - Moving Reference Frames.mp4 160.66 MB
452736 - 278 - Pitch Change and Intersection.mp4 64.39 MB
452736 - 279 - Mesh Deformation.mp4 85.95 MB
452736 - 280 - Workshop 6 Axial Fan.mp4 154.74 MB
452736 - 281 - Conduction, Convection and Radiation.mp4 58.66 MB
452736 - 282 - Heat Transfer Models.mp4 20.65 MB
452736 - 283 - Radiation Models.mp4 25.8 MB
452736 - 284 - Conduction in Solids.mp4 8.67 MB
452736 - 285 - Thermal Boundary Conditions.mp4 17.36 MB
452736 - 286 - Conjugate Heat Transfer.mp4 16.29 MB
452736 - 287 - Post-Processing Heat Transfer.mp4 24.4 MB
452736 - 288 - Tips.mp4 13.98 MB
452736 - 289 - Workshop 8 Electronics Cooling.mp4 205.63 MB
452736 - 290 - Approaches to Turbulence Modelling.mp4 52.21 MB
452736 - 291 - RANS (Reynolds-Averaged Navier Stokes) Models.mp4 25.94 MB
452736 - 292 - Models in CFX, including k-e and k-omega.mp4 12.72 MB
452736 - 293 - SST (Shear Stress Transport) Model.mp4 22.67 MB
452736 - 294 - Turbulence near a Wall.mp4 37.57 MB
452736 - 295 - Inlet Boundary Conditions.mp4 19.51 MB
452736 - 296 - Introduction and Motivation.mp4 26.3 MB
452736 - 297 - Setting up a Transient Flow.mp4 19.18 MB
452736 - 298 - Picking an Appropriate Timestep.mp4 26.38 MB
452736 - 299 - Boundary Conditions and Initialization.mp4 11.9 MB
452736 - 300 - Solver Control.mp4 15.63 MB
452736 - 301 - Output Control.mp4 28.88 MB
452736 - 302 - Workshop 9 Tank Flush.mp4 135.12 MB
452736 - 303 - Overview of Quailty Issues.mp4 15.5 MB
452736 - 304 - Roundoff and Iteration Errors.mp4 25.57 MB
452736 - 305 - Discretiziation Errors.mp4 15.48 MB
452736 - 306 - Model and Systematic Errors.mp4 10.6 MB
452736 - 307 - Meshing Best Practice.mp4 16.4 MB
452736 - 308 - Mesh Quality.mp4 20.3 MB
452736 - 309 - Hex v Tet Meshes.mp4 15.15 MB
452736 - 310 - Workshop 10 Vortex Shedding.mp4 131.32 MB
452736 - 311 - Introduction.mp4 31.24 MB
452736 - 312 - Additional Variables.mp4 62.15 MB
452736 - 313 - CEL (CFX Expression Language).mp4 36.27 MB
452736 - 314 - CEL Examples.mp4 22.77 MB
452736 - 315 - User Functions.mp4 20.85 MB
452736 - 316 - Integrated Quantities.mp4 31.51 MB
452736 - 317 - CCL (CFX Command Language).mp4 80.26 MB
452736 - 318 - Introduction and what is CFD.mp4 26.88 MB
452736 - 319 - Preparation and Planning.mp4 18.95 MB
452736 - 320 - Geometry and Mesh.mp4 29.63 MB
452736 - 321 - Solver Setup and Solution.mp4 29.54 MB
452736 - 322 - Results and Evaluation.mp4 24.83 MB
452736 - 323 - Workshop 1 Mixing Tee.mp4 151.84 MB
452736 - 324 - Introduction.mp4 6.97 MB
452736 - 325 - Material Properties, inc Fixed or Variable Density.mp4 37.47 MB
452736 - 326 - Operating Pressure.mp4 11.58 MB
452736 - 327 - Cell Zones Introduction.mp4 21.51 MB
452736 - 328 - Cell Zones Fluid, Porous and Solid.mp4 18.24 MB
452736 - 329 - Boundary Conditions Introduction.mp4 39.17 MB
452736 - 330 - Inlet BCs Velocity, Pressure and Mass-Flow.mp4 33.97 MB
452736 - 331 - Outlet BCs Pressure and Outflow.mp4 24.77 MB
452736 - 332 - Wall, Symmetry and Axis Boundaries.mp4 16.25 MB
452736 - 333 - Copying BCs.mp4 11.24 MB
452736 - 334 - Good Practice when Defining Boundaries.mp4 84.49 MB
452736 - 335 - Workshop 2 Discrete Phase Model.mp4 194.11 MB
452736 - 336 - Introduction and Overview.mp4 15.9 MB
452736 - 337 - Postprocessing Within Fluent.mp4 61.38 MB
452736 - 338 - CFD-Post Introduction and Launching.mp4 21.48 MB
452736 - 339 - 3D Standalone Viewer.mp4 8.01 MB
452736 - 340 - General Workflow.mp4 35.01 MB
452736 - 341 - Variables, Tables and Charts.mp4 29.49 MB
452736 - 342 - Reports and Case Comparison.mp4 35.7 MB
452736 - 343 - Workshop 3 Post-Processing.mp4 229.36 MB
452736 - 344 - Overview of Solvers (Pressure and Density Based).mp4 39.83 MB
452736 - 345 - Pressure-Based Solver.mp4 67.54 MB
452736 - 346 - Pseudo-Transient.mp4 14.17 MB
452736 - 347 - Density-Based Solver.mp4 21.02 MB
452736 - 348 - Discretization Methods (1st 2nd order).mp4 79.58 MB
452736 - 349 - Initialization.mp4 47.9 MB
452736 - 350 - Case Check.mp4 4.04 MB
452736 - 351 - Convergence Checking.mp4 48.24 MB
452736 - 352 - Convergence Troubleshooting and Accuracy.mp4 15.89 MB
452736 - 353 - Mesh Adaption.mp4 44.59 MB
452736 - 354 - Workshop 4 Airfoil.mp4 198.28 MB
452736 - 355 - Background to Turbulent Flow.mp4 63.82 MB
452736 - 356 - Mean and Instantaneous Velocities.mp4 23.1 MB
452736 - 357 - Overview of Approaches (DNS LES RANS).mp4 29.63 MB
452736 - 358 - RANS (Reynolds-Averaged Naview Stokes) Models.mp4 35.1 MB
452736 - 359 - Models Available in Fluent.mp4 12.08 MB
其他位置